One Piece Vs Two Piece Toilets: Which One To Pick?

There are many types of toilets available today. Have a look here to learn more about one piece vs. two-piece toilets.

The toilet is quite tricky with some sanitary equipment. One-piece vs two-piece is very useful here. However, the water supply valve, flush valve, and wax ring through the seal on the toilet floor may fail. Then from time to time, it has to be a little different. The porcelain or porcelain container can maintain a perfect operating shape unless the bowl or tank catches cracks.

However, it is essential to change your toilet for the perfect aesthetic reason. Such as during the bathroom reconstruction or take advantage of new water-saving features in modern toilet design.

Changing the toilet yourself can seem like a daunting task. But a little research and planning in advance are easy. But before you get to this point, you need to know how to measure new toilet items. You also need to know what options you have when buying a replacement toilet.

Take the measurements

The first step is to measure to make sure the toilet you are buying is in the same place as the old one.

Measure the center of the bolts from the toilet’s back wall to the bottom of the bathroom. If your existing toilet has four bolts, measure the center position of the rear bolts. Take this measure as a rough measure. For a standard bathroom, the average measurements are between 11 inches and 13 inches. When you go to buy a replacement toilet, keep this measure convenient.

If the roughness measurement is not between 11 inches and 13 inches, then the standard toilet does not fit in place. You will then need to find a toilet specifically within a certain rough penetration distance. Toilets designed for 10-inch use are more common. These are usually used in tiny bathrooms with tiny spaces.

For smaller bathrooms, it is also a good idea to measure the space around the toilet. This can take up too much space if you choose a separate bowl-sized toilet. Also, it has trouble getting to the bathroom, mom.

Research your options

By measuring, you need to consider what options are available for your new toilet-and, there are many more.

Type: The first option is one-piece and two-piece models. For a one-piece toilet, the tank and bowl are an integral unit. These toilets look very sleek and low, but they are usually more expensive than typical two-piece toilets. Since two-piece toilets are more common, their prices are also more competitive.

There are also highly sophisticated ” smart” washrooms, including temperature-adjustable heated seats and even automatic cleaning without toilet paper.

Design: Toilets have different uses and needs. Among the considerations you can choose:

  • Bowl shape: You can select those long round, long round, or circular bowls in the toilet’s choice. The elongated toilet provides a deeper seating area and is suitable for most residential applications. The long compact bathroom has a slightly shorter footprint and takes up less space while still providing adequate comfort. Dome-style bathrooms take up the smallest amount of space anthe are the right choice for precious space.
  • Seat height: The standard height toilet seat is about 17 inches above the ground. Seat-height toilets are slightly higher, about 19 inches above the floor, making them easier to use for the elderly or people with limited mobility. There are also custom-height toilets installed on the wall. It can establish at a height of about 15 inches to 28 inches above the ground.
  • Toilet trap: The trap structure of the toilet can expose. The fixture’s integral trap can see from the side. In other cases, the fixture design hides the trap structure, so the toilet’s side-view provides a flat surface. This is an aesthetic issue: the visible trap toilet is ideal for a classic bathroom, the bathtub equipment with a base sink and a freestanding bathtub, while a hidden sink toilet may look better in a more modern bathroom.
  • Flush handle position: The toilet handles for operating the flushing mechanism can locate on the water tank’s left or right side of the top cover. There is also a non-contact flushing mode, where a simple touch anywhere in the tank initiates flushing. Today, there are even toilets with electronic remote flushing systems.

Toilet flushing technology: Compared with the old toilets, most toilets purchased now are water-saving, but there are many options to choose from.

  • Single rinse: These toilets have the same consistency every time they can use. In most cases, about 1 to 1.5 gallons can uses per flush, although fewer models can employ. Since it is the most common, this type offers the most comprehensive range of designs, shapes, and colors.
  • Double flush: These devices have a two-stage lever mechanism that can provide light for liquid waste or provide full flushing for solid waste. The light flush uses only 0.6 gallons of water, while the large color uses 1.5 gallons or more.
  • Non-contact flushing: These toilets have a battery-powered electronic sensor, which can initiate by merely flushing the sensor eye with a finger. Because there is no physical contact, the chance of spreading bacteria is least.

Buy a new toilet

The price of new toilets varies a lot. Once you can select to replace the bathroom, make sure you also purchase any components that can not include, such as wax pads and toilet bolts. Today, many bathrooms can use water supply (ball valve) valves for ease of installation, but this part may also need investments separately. It is a good idea to replace the water supply pipe and shut-off valve after each toilet replacement.

Use caution when transporting and installing toilets—almost everything is made of glass porcelain or porcelain. If left out, they will crack or disintegrate.

Conclusion

The toilet is an essential thing. You can choose either one piece vs. two pieces. I hope you got the idea about the bathroom by reading this article.

Leave a Comment

Your email address will not be published. Required fields are marked *